New floors
Keeping your new floor lasting as long as possible requires quality work to be done on it. Another important requirement is the long-term wear resistance needed for static loads and operations.
Products for the application of new floors
When to use
- For preparing the wear layer of industrial concrete floors
- Increasing resistance against abrasion and absorption
- Extending the life of concrete floors
- Enhancing the aesthetic appearance of concrete floors
How to do it
- Lay a concrete slab at a minimum of 10 cm
- Apply a dune of dry mix to the fresh slab
- Commence smoothing
- Apply a sealing lacquer
- At the end, cut around the joints and fill in with grout
When to use
- To achieve the maximum hardening of the original floor and improve its features
- Reducing the porosity of the original surface, higher frost resistance
- Complying with the principles of the original application according to the design documentation
How to do it
- Clean the original floor and get rid of loose parts
- Intensively saturate the surface with water
- Apply Fortedur 1091 cement bridge
- Mix the screed powder with water according to instructions
- Spread and even out with a squeegee
- Once the surface hardens, smooth the floor with a rotary buffer machine
- Apply Fortecoat sealing lacquer
- At the end, cut around the joints and fill in with grout