Keeping your new floor lasting as long as possible requires quality work to be done on it. Another important requirement is the long-term wear resistance needed for static loads and operations.

Products for the application of new floors

When to use

  • For preparing the wear layer of industrial concrete floors
  • Increasing resistance against abrasion and absorption
  • Extending the life of concrete floors
  • Enhancing the aesthetic appearance of concrete floors

How to do it

  • Lay a concrete slab at a minimum of 10 cm
  • Apply a dune of dry mix to the fresh slab
  • Commence smoothing
  • Apply a sealing lacquer
  • At the end, cut around the joints and fill in with grout

When to use

  • To achieve the maximum hardening of the original floor and improve its features
  • Reducing the porosity of the original surface, higher frost resistance
  • Complying with the principles of the original application according to the design documentation

How to do it

  • Clean the original floor and get rid of loose parts
  • Intensively saturate the surface with water
  • Apply Fortedur 1091 cement bridge
  • Mix the screed powder with water according to instructions
  • Spread and even out with a squeegee
  • Once the surface hardens, smooth the floor with a rotary buffer machine
  • Apply Fortecoat sealing lacquer
  • At the end, cut around the joints and fill in with grout

Contact us

Who will call you back

Jakub Havel

Sales department for countries of Europe